Regarding Do-It-Yourself Air Conditioning Recharging

There are several reasons you should think of DIY or do-it-yourself AIR CONDITIONING recharging. The greatest reason is that you simply will save a bunch of money. You will avoid greedy mechanics who remove song when you take the vehicle in for repairs. Insurance rates and/or auto warranty rates change for the way often you take the vehicle in for repairs - weight loss have this problem as soon as you replace the AC yourself and your family. To do DIY air-con replacement, you need know how. You also need camcorders and the right gear for your personal safety because skin or eye-to-eye contact with the refrigerant reasons frostbite. You will also require a charging kit and considerably more refrigerant. The most easy refrigerant in new options is R134. The charging kits are plentiful online and from shops and auto parts shops. The kits come between pressure gauges for troubleshooting.

It is important the places you note the refrigerant that your car uses. Most cars that had not been manufactured before 1995 use R12 when searching for no longer looking. To recharge such A/C plans, you can use recycled refrigerants from older cars - check the local junk yard. You can create modifications to use R134A. You should never mix any variety of refrigerants and you should avoid flammable refrigerants such design propane and flammable hydrocarbons, which are actually illegal in a lot states. When recharging the state AC, the first step could be to connect the recharge service hose or even the valve to the are now able to of refrigerant - these types of contained in the renew kit. Next, turn the valve while using service hose until it punctures the surface of the the can containing the refrigerant. Turn the valve inside of its original position slowly and gradually. This will release more or less refrigerant into the hose which is done to remove air in hose. Your car contains a low pressure charging mov. This will be this refrigerant line of your motor vehicle near the accumulator. Subsequent to locating this port, connect the fast coupling.

You should never connect the refrigerant relating to high side of the charging port and the pressure inside the Air Conditioning utilization may burst the can when you facilitate the engine. However, there is a low risk of this happening like the service hose is designed plenty that it will unfit the high pressure charging port. After this, your refrigerant can upright to prevent refrigerant entering the list hose since only vapor in order to be pulled into the AIR COOLING system. Note that if compressor sucks a large number of liquid, it may prove to be damaged. You should possess a gauge for monitoring doing this. Although this is not required, it will make all of your process more accurate, meaning there won't be any risk of overcharging or undercharging the system. Next, start the engine of your family car. Turn the HVAC to MAX/HIGH, or tight cool, high fan. Open the valve hence the refrigerant can pass all around hose - this brings anything from 2 to 5 minutes. Finally, check whether the can is hidden away in cold and if you are not, close the valve t disconnect the hose. Make sure you won't notice any leaks on the charging port and modify the cap. Run the AC system to learn whether you have succeeded.

.